• Antik 👾@lemmy.world
    link
    fedilink
    arrow-up
    7
    ·
    edit-2
    1 year ago

    For me it’s https://nginxproxymanager.com/ it’s just so easy to setup and use. One docker command and you’re up and running with a nice webinterface to manage access to your docker instances with ssl. I heard good things about Traefik too but I have no personal experience with that one. NPM does everything I need and if it ain’t broken… :)

    Edit: because people love screenshots https://nginxproxymanager.com/screenshots/

    • lvl@beehaw.org
      link
      fedilink
      arrow-up
      2
      ·
      1 year ago

      I second that. Amazing easy to use, configure, supports (LetsEncrypt) certificates via DNS-01 challenge and integrates with ease with most DNS providers.

      Paired with authentication providers (keycloak, authelia, authentik), the “advanced” textbox lets you do forward proxying really easy, or customize your “basic proxy”.

      I’m not sure how many of these features are present in Traefik, it would be really nice if any of you know if any of these are easily supported in it:

      • Forward proxying
      • Custom rewrites (nginx internal; rewrites)
      • Unattended DNS-01 support with ACME (LetsEncrypt)
    • frap129@lemmy.maples.dev
      link
      fedilink
      arrow-up
      1
      ·
      1 year ago

      I used NPM for a very long time, but after I switched to podman, DNS name resolution for containers stopped working in NPM, they work fine in every other container. Switched to caddy and it’s okay, it only supports HTTP transports so I can’t use it as a gateway for my DoH/DoT server, but that’s not a huge deal. Once NPM works properly on podman I may switch back

    • D4NM3D@reddthat.com
      link
      fedilink
      arrow-up
      0
      ·
      1 year ago

      I’ve been using NPM for years… but since 2.10.3 broke SSL certificates and there’s been literally no interest from JC21 to fix the problem (there’s a PR ready to go) i’ve been forced to look elsewhere and have settled on caddy for now…

      • Mike@lemmy.ml
        link
        fedilink
        arrow-up
        0
        ·
        1 year ago

        To be fair, the pull request was last week. It’s inconvenient but life/work balance.

        • D4NM3D@reddthat.com
          link
          fedilink
          arrow-up
          1
          ·
          edit-2
          1 year ago

          Agreed but it’s more the worry that it’s been broken for over 3 weeks and the dev(s) seems to have no interest in resolving it… to me that is a bad sign of things to come and projects being abandoned.

          If i’m incorrect and the devs have been vocal about the issue then please correct me and point me to where i should be looking.

          • Mike@lemmy.ml
            link
            fedilink
            arrow-up
            1
            ·
            edit-2
            1 year ago

            I’m not challenging you, so please don’t take offence here but is the issue sincerely a ‘lack of interest’ or is it just that NPM is FOSS and the maintainer is bogged down with life? You could fork it and fix it.

            • D4NM3D@reddthat.com
              link
              fedilink
              arrow-up
              1
              ·
              1 year ago

              It’s a very good question and of course… i could fork it and fix it using the PR… but then that would be it… I’m not experienced enough to even achieve that to be honest…

              My issue I guess is not so much with the fact that there is a problem… it’s with the fact that i can’t afford for my homelab to be down because it’s never fixed or takes time to fix… i appreciate all of this is free… i think i may of even donated at some point because i was so thankful it existed… but now it’s such an integral part of my and my families life that i cannot have something in my stack that isn’t going to be fixed rapidly.

              JC21 created an amazing product and if it’s fixed or V3 ever appears i’ll 100% check it out… but for now whilst it’s not as pretty… i have to fall back to caddy.

    • DarkwinDuck@feddit.de
      link
      fedilink
      arrow-up
      0
      ·
      1 year ago

      I used Traefik on my Docker stack and it’s pretty neat, though it took some time for me to get my head around how to configure it correctly.

      • Antik 👾@lemmy.world
        link
        fedilink
        arrow-up
        1
        ·
        1 year ago

        Yeah seems like I was lucky to find what I needed on the first try. A colleague of mine was using Traefik but switched to NPM because it’s so easy to use.

  • Domi@lemmy.secnd.me
    link
    fedilink
    arrow-up
    4
    ·
    1 year ago

    Traefik, because I can configure it with labels on my containers and don’t have to deal with the proxy config every time I add a new service.

    Used nginx for years but it’s starting to show the signs of its age, same as Apache did a few years before that.

  • Admin-Mike@lemmy.nine-hells.net
    link
    fedilink
    arrow-up
    2
    ·
    1 year ago

    I used to use Traefik but switched to Caddy. I like how easy it is to configure a new reverse proxy for one of my containers. Literally 3 new lines in my Caddyfile, restart the caddy container and away it goes getting certificates etc.

    • Edo78@feddit.it
      link
      fedilink
      English
      arrow-up
      0
      ·
      1 year ago

      I’m not a Caddy expert (nor a Traefik one) but with Traefik I didn’t even have to add any line to its config. I just use a template docker-compose and set the domain and the port.

      • Admin-Mike@lemmy.nine-hells.net
        link
        fedilink
        English
        arrow-up
        2
        ·
        1 year ago

        Yeah from memory (was a while ago), Traefik hooks into the docker socket to auto-discover containers that have a specific label? Might not be remembering that correctly.

  • lidstah@lemmy.sdf.org
    link
    fedilink
    arrow-up
    2
    ·
    1 year ago
    • almost everywhere: HAProxy. I like the syntax, ACLs, map files, stick-tables… there’s too much to say in a single post, but I use it since 2012 and it never failed me, whatever the need, both at home and at work.
    • kubernetes: ingress-nginx. Mostly because it’s the first one I tried back in the days and it just works :). Although I should try one of the haproxy based ingresses, or Traefik, which seems interesting too.
  • rolaulten@lemmy.ml
    link
    fedilink
    arrow-up
    2
    ·
    1 year ago

    Let’s see. At work it’s a mix between apache (I’m slowly replacing with nginx as services are migrated) and aws’s alb ingress controller (while I’m not a fan, it lets me use acm certs).

    At home it’s all nginx.

  • Malin@omg.qa
    link
    fedilink
    arrow-up
    2
    ·
    1 year ago

    HaProxy for most of the stuff and Nginx for very limited stuff. Or a combination between HaProxy and Nginx in some very special cases.

  • Ekis@beehaw.org
    link
    fedilink
    arrow-up
    2
    ·
    1 year ago

    I made the switch from NGINX to Caddy. For me, configuring Caddy is much more simple than configuring NGINX. Also Caddy automatically obtains and renews SSL certificates.

    So, Caddy’s simplicity is what won me over. I don’t care about speed since I’m the only user of my self-hosted services.

  • ycnz@lemmy.nz
    link
    fedilink
    arrow-up
    2
    ·
    1 year ago

    Traefik across 3 nodes internally for its Nomad service discovery. HAProxy for my non-Nomad stuff.

  • mariom@lemmy.world
    link
    fedilink
    arrow-up
    2
    ·
    1 year ago

    Depends ;)

    Private: Traefik, as it was default on k3s and I just get used to it. Work: mostly Nginx

  • Tyr3al@feddit.de
    link
    fedilink
    arrow-up
    2
    ·
    1 year ago

    For me it’s traefik. It’s took me a while to get it working, but it’s actually really easy now. Setting up container access with labels is very convenient!